summaryrefslogtreecommitdiff
path: root/drivers/regulator/ab8500.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator/ab8500.c')
-rw-r--r--drivers/regulator/ab8500.c1172
1 files changed, 1172 insertions, 0 deletions
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
new file mode 100644
index 00000000000..e281c117adb
--- /dev/null
+++ b/drivers/regulator/ab8500.c
@@ -0,0 +1,1172 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * AB8500 peripheral regulators
+ *
+ * AB8500 supports the following regulators:
+ * VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/ab8500.h>
+#include <linux/mfd/ab8500/ab8500-gpio.h> /* for sysclkreq pins */
+#include <mach/gpio.h> /* for sysclkreq pins */
+
+/**
+ * struct ab8500_regulator_info - ab8500 regulator information
+ * @dev: device pointer
+ * @desc: regulator description
+ * @regulator_dev: regulator device
+ * @is_enabled: status of regulator (on/off)
+ * @max_uV: maximum voltage (for variable voltage supplies)
+ * @min_uV: minimum voltage (for variable voltage supplies)
+ * @fixed_uV: typical voltage (for fixed voltage supplies)
+ * @load_lp_uA: maximum load in idle (low power) mode
+ * @update_bank: bank to control on/off
+ * @update_reg: register to control on/off
+ * @update_mask: mask to enable/disable and set mode of regulator
+ * @update_val: bits holding the regulator current mode
+ * @update_val_idle: bits to enable the regulator in idle (low power) mode
+ * @update_val_normal: bits to enable the regulator in normal (high power) mode
+ * @voltage_bank: bank to control regulator voltage
+ * @voltage_reg: register to control regulator voltage
+ * @voltage_mask: mask to control regulator voltage
+ * @voltages: supported voltage table
+ * @voltages_len: number of supported voltages for the regulator
+ * @delay: startup delay in ms
+ * @gpio_pin: gpio pin number (for sysclkreq regulator only)
+ */
+struct ab8500_regulator_info {
+ struct device *dev;
+ struct regulator_desc desc;
+ struct regulator_dev *regulator;
+ bool is_enabled;
+ int max_uV;
+ int min_uV;
+ int fixed_uV;
+ int load_lp_uA;
+ u8 update_bank;
+ u8 update_reg;
+ u8 update_mask;
+ u8 update_val;
+ u8 update_val_idle;
+ u8 update_val_normal;
+ u8 voltage_bank;
+ u8 voltage_reg;
+ u8 voltage_mask;
+ int const *voltages;
+ int voltages_len;
+ unsigned int delay;
+ unsigned int gpio_pin;
+};
+
+/* voltage tables for the vauxn/vintcore supplies */
+static const int ldo_vauxn_voltages[] = {
+ 1100000,
+ 1200000,
+ 1300000,
+ 1400000,
+ 1500000,
+ 1800000,
+ 1850000,
+ 1900000,
+ 2500000,
+ 2650000,
+ 2700000,
+ 2750000,
+ 2800000,
+ 2900000,
+ 3000000,
+ 3300000,
+};
+
+static const int ldo_vaux3_voltages[] = {
+ 1200000,
+ 1500000,
+ 1800000,
+ 2100000,
+ 2500000,
+ 2750000,
+ 2790000,
+ 2910000,
+};
+
+static const int ldo_vintcore_voltages[] = {
+ 1200000,
+ 1225000,
+ 1250000,
+ 1275000,
+ 1300000,
+ 1325000,
+ 1350000,
+};
+
+static int ab8500_regulator_enable(struct regulator_dev *rdev)
+{
+ int ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->update_bank, info->update_reg,
+ info->update_mask, info->update_val);
+ if (ret < 0)
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set enable bits for regulator\n");
+
+ msleep(info->delay);
+
+ info->is_enabled = true;
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
+ info->desc.name, info->update_bank, info->update_reg,
+ info->update_mask, info->update_val);
+
+ return ret;
+}
+
+static int ab8500_regulator_disable(struct regulator_dev *rdev)
+{
+ int ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->update_bank, info->update_reg,
+ info->update_mask, 0x0);
+ if (ret < 0)
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set disable bits for regulator\n");
+
+ msleep(info->delay);
+
+ info->is_enabled = false;
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
+ info->desc.name, info->update_bank, info->update_reg,
+ info->update_mask, 0x0);
+
+ return ret;
+}
+
+static unsigned int ab8500_regulator_get_optimum_mode(
+ struct regulator_dev *rdev, int input_uV,
+ int output_uV, int load_uA)
+{
+ unsigned int mode;
+
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ if (load_uA <= info->load_lp_uA)
+ mode = REGULATOR_MODE_IDLE;
+ else
+ mode = REGULATOR_MODE_NORMAL;
+
+ return mode;
+}
+
+static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ int ret = 0;
+
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ info->update_val = info->update_val_normal;
+ break;
+ case REGULATOR_MODE_IDLE:
+ info->update_val = info->update_val_idle;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (info->is_enabled) {
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->update_bank, info->update_reg,
+ info->update_mask, info->update_val);
+ if (ret < 0)
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set regulator mode\n");
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "%s-set_mode (bank, reg, mask, value): "
+ "0x%x, 0x%x, 0x%x, 0x%x\n",
+ info->desc.name, info->update_bank, info->update_reg,
+ info->update_mask, info->update_val);
+ }
+
+ return ret;
+}
+
+static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ if (info->update_val == info->update_val_normal)
+ ret = REGULATOR_MODE_NORMAL;
+ else if (info->update_val == info->update_val_idle)
+ ret = REGULATOR_MODE_IDLE;
+ else
+ ret = -EINVAL;
+
+ return ret;
+}
+
+static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ int ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ u8 regval;
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ ret = abx500_get_register_interruptible(info->dev,
+ info->update_bank, info->update_reg, &regval);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "couldn't read 0x%x register\n", info->update_reg);
+ return ret;
+ }
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
+ " 0x%x\n",
+ info->desc.name, info->update_bank, info->update_reg,
+ info->update_mask, regval);
+
+ if (regval & info->update_mask)
+ info->is_enabled = true;
+ else
+ info->is_enabled = false;
+
+ return info->is_enabled;
+}
+
+static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ /* return the uV for the fixed regulators */
+ if (info->fixed_uV)
+ return info->fixed_uV;
+
+ if (selector >= info->voltages_len)
+ return -EINVAL;
+
+ return info->voltages[selector];
+}
+
+static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
+{
+ int ret, val;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ u8 regval;
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ ret = abx500_get_register_interruptible(info->dev,
+ info->voltage_bank, info->voltage_reg, &regval);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "couldn't read voltage reg for regulator\n");
+ return ret;
+ }
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
+ " 0x%x\n",
+ info->desc.name, info->voltage_bank, info->voltage_reg,
+ info->voltage_mask, regval);
+
+ /* vintcore has a different layout */
+ val = regval & info->voltage_mask;
+ if (info->desc.id == AB8500_LDO_INTCORE)
+ ret = info->voltages[val >> 0x3];
+ else
+ ret = info->voltages[val];
+
+ return ret;
+}
+
+static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ int i;
+
+ /* check the supported voltage */
+ for (i = 0; i < info->voltages_len; i++) {
+ if ((info->voltages[i] >= min_uV) &&
+ (info->voltages[i] <= max_uV))
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ u8 regval;
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ /* get the appropriate voltages within the range */
+ ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "couldn't get best voltage for regulator\n");
+ return ret;
+ }
+
+ /* vintcore register has a different layout */
+ if (info->desc.id == AB8500_LDO_INTCORE)
+ regval = ((u8)ret) << 3;
+ else
+ regval = (u8)ret;
+
+ /* set the registers for the request */
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->voltage_bank, info->voltage_reg,
+ info->voltage_mask, regval);
+ if (ret < 0)
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set voltage reg for regulator\n");
+
+ msleep(info->delay);
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
+ " 0x%x\n",
+ info->desc.name, info->voltage_bank, info->voltage_reg,
+ info->voltage_mask, regval);
+
+ return ret;
+}
+
+static struct regulator_ops ab8500_regulator_volt_mode_ops = {
+ .enable = ab8500_regulator_enable,
+ .disable = ab8500_regulator_disable,
+ .is_enabled = ab8500_regulator_is_enabled,
+ .get_optimum_mode = ab8500_regulator_get_optimum_mode,
+ .set_mode = ab8500_regulator_set_mode,
+ .get_mode = ab8500_regulator_get_mode,
+ .get_voltage = ab8500_regulator_get_voltage,
+ .set_voltage = ab8500_regulator_set_voltage,
+ .list_voltage = ab8500_list_voltage,
+};
+
+static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ return info->fixed_uV;
+}
+
+static struct regulator_ops ab8500_regulator_mode_ops = {
+ .enable = ab8500_regulator_enable,
+ .disable = ab8500_regulator_disable,
+ .is_enabled = ab8500_regulator_is_enabled,
+ .get_optimum_mode = ab8500_regulator_get_optimum_mode,
+ .set_mode = ab8500_regulator_set_mode,
+ .get_mode = ab8500_regulator_get_mode,
+ .get_voltage = ab8500_fixed_get_voltage,
+ .list_voltage = ab8500_list_voltage,
+};
+
+static struct regulator_ops ab8500_regulator_ops = {
+ .enable = ab8500_regulator_enable,
+ .disable = ab8500_regulator_disable,
+ .is_enabled = ab8500_regulator_is_enabled,
+ .get_voltage = ab8500_fixed_get_voltage,
+ .list_voltage = ab8500_list_voltage,
+};
+
+static int ab8500_sysclkreq_enable(struct regulator_dev *rdev)
+{
+ int ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ ret = ab8500_gpio_config_select(info->dev, info->gpio_pin, false);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set sysclkreq pin selection\n");
+ return ret;
+ }
+
+ info->is_enabled = true;
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "%s-enable (gpio_pin, gpio_select): %i, false\n",
+ info->desc.name, info->gpio_pin);
+
+ return ret;
+}
+
+static int ab8500_sysclkreq_disable(struct regulator_dev *rdev)
+{
+ int ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ ret = ab8500_gpio_config_select(info->dev, info->gpio_pin, true);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "couldn't set gpio pin selection\n");
+ return ret;
+ }
+
+ info->is_enabled = false;
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "%s-disable (gpio_pin, gpio_select): %i, true\n",
+ info->desc.name, info->gpio_pin);
+
+ return ret;
+}
+
+static int ab8500_sysclkreq_is_enabled(struct regulator_dev *rdev)
+{
+ int ret;
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ bool gpio_select;
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ ret = ab8500_gpio_config_get_select(info->dev, info->gpio_pin,
+ &gpio_select);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev),
+ "couldn't read gpio pin selection\n");
+ return ret;
+ }
+
+ info->is_enabled = !gpio_select;
+
+ dev_vdbg(rdev_get_dev(rdev),
+ "%s-is_enabled (gpio_pin, is_enabled): %i, %i\n",
+ info->desc.name, info->gpio_pin, !gpio_select);
+
+ return info->is_enabled;
+}
+
+static struct regulator_ops ab8500_sysclkreq_ops = {
+ .enable = ab8500_sysclkreq_enable,
+ .disable = ab8500_sysclkreq_disable,
+ .is_enabled = ab8500_sysclkreq_is_enabled,
+ .get_voltage = ab8500_fixed_get_voltage,
+ .list_voltage = ab8500_list_voltage,
+};
+
+static struct ab8500_regulator_info
+ ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
+ /*
+ * Regulators with variable voltage and normal/idle modes
+ */
+ [AB8500_LDO_AUX1] = {
+ .desc = {
+ .name = "LDO-AUX1",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX1,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x1f,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8500_LDO_AUX2] = {
+ .desc = {
+ .name = "LDO-AUX2",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX2,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x0c,
+ .update_val = 0x04,
+ .update_val_idle = 0x0c,
+ .update_val_normal = 0x04,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x20,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8500_LDO_AUX3] = {
+ .desc = {
+ .name = "LDO-AUX3",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX3,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x0a,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x21,
+ .voltage_mask = 0x07,
+ .voltages = ldo_vaux3_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ [AB8500_LDO_INTCORE] = {
+ .desc = {
+ .name = "LDO-INTCORE",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_INTCORE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x44,
+ .update_val = 0x04,
+ .update_val_idle = 0x44,
+ .update_val_normal = 0x04,
+ .voltage_bank = 0x03,
+ .voltage_reg = 0x80,
+ .voltage_mask = 0x38,
+ .voltages = ldo_vintcore_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
+ },
+
+ /*
+ * Regulators with fixed voltage and normal/idle modes
+ */
+ [AB8500_LDO_TVOUT] = {
+ .desc = {
+ .name = "LDO-TVOUT",
+ .ops = &ab8500_regulator_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_TVOUT,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .delay = 10,
+ .fixed_uV = 2000000,
+ .load_lp_uA = 1000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x82,
+ .update_val = 0x02,
+ .update_val_idle = 0x82,
+ .update_val_normal = 0x02,
+ },
+
+ /*
+ * Regulators with fixed voltage and normal mode
+ */
+ [AB8500_LDO_AUDIO] = {
+ .desc = {
+ .name = "LDO-AUDIO",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUDIO,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2000000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x02,
+ .update_val = 0x02,
+ },
+ [AB8500_LDO_ANAMIC1] = {
+ .desc = {
+ .name = "LDO-ANAMIC1",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC1,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x08,
+ .update_val = 0x08,
+ },
+ [AB8500_LDO_ANAMIC2] = {
+ .desc = {
+ .name = "LDO-ANAMIC2",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC2,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x10,
+ .update_val = 0x10,
+ },
+ [AB8500_LDO_DMIC] = {
+ .desc = {
+ .name = "LDO-DMIC",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_DMIC,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1800000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x04,
+ .update_val = 0x04,
+ },
+
+ /*
+ * Regulators with fixed voltage and normal/idle modes
+ */
+ [AB8500_LDO_ANA] = {
+ .desc = {
+ .name = "LDO-ANA",
+ .ops = &ab8500_regulator_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANA,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1200000,
+ .load_lp_uA = 1000,
+ .update_bank = 0x04,
+ .update_reg = 0x06,
+ .update_mask = 0x0c,
+ .update_val = 0x04,
+ .update_val_idle = 0x0c,
+ .update_val_normal = 0x04,
+ },
+
+ /*
+ * SysClkReq regulators
+ */
+ [AB8500_SYSCLKREQ_2] = {
+ .desc = {
+ .name = "SYSCLKREQ-2",
+ .ops = &ab8500_sysclkreq_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_SYSCLKREQ_2,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1, /* bogus value */
+ .gpio_pin = AB8500_PIN_GPIO1,
+ },
+ [AB8500_SYSCLKREQ_4] = {
+ .desc = {
+ .name = "SYSCLKREQ-4",
+ .ops = &ab8500_sysclkreq_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_SYSCLKREQ_4,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1, /* bogus value */
+ .gpio_pin = AB8500_PIN_GPIO3,
+ },
+};
+
+struct ab8500_reg_init {
+ u8 bank;
+ u8 addr;
+ u8 mask;
+};
+
+#define REG_INIT(_id, _bank, _addr, _mask) \
+ [_id] = { \
+ .bank = _bank, \
+ .addr = _addr, \
+ .mask = _mask, \
+ }
+
+static struct ab8500_reg_init ab8500_reg_init[] = {
+ /*
+ * 0x30, VanaRequestCtrl
+ * 0x0c, VpllRequestCtrl
+ * 0xc0, VextSupply1RequestCtrl
+ */
+ REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xfc),
+ /*
+ * 0x03, VextSupply2RequestCtrl
+ * 0x0c, VextSupply3RequestCtrl
+ * 0x30, Vaux1RequestCtrl
+ * 0xc0, Vaux2RequestCtrl
+ */
+ REG_INIT(AB8500_REGUREQUESTCTRL3, 0x03, 0x05, 0xff),
+ /*
+ * 0x03, Vaux3RequestCtrl
+ * 0x04, SwHPReq
+ */
+ REG_INIT(AB8500_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
+ /*
+ * 0x01, Vsmps1SysClkReq1HPValid
+ * 0x02, Vsmps2SysClkReq1HPValid
+ * 0x04, Vsmps3SysClkReq1HPValid
+ * 0x08, VanaSysClkReq1HPValid
+ * 0x10, VpllSysClkReq1HPValid
+ * 0x20, Vaux1SysClkReq1HPValid
+ * 0x40, Vaux2SysClkReq1HPValid
+ * 0x80, Vaux3SysClkReq1HPValid
+ */
+ REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
+ /*
+ * 0x10, VextSupply1SysClkReq1HPValid
+ * 0x20, VextSupply2SysClkReq1HPValid
+ * 0x40, VextSupply3SysClkReq1HPValid
+ */
+ REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x70),
+ /*
+ * 0x08, VanaHwHPReq1Valid
+ * 0x20, Vaux1HwHPReq1Valid
+ * 0x40, Vaux2HwHPReq1Valid
+ * 0x80, Vaux3HwHPReq1Valid
+ */
+ REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xe8),
+ /*
+ * 0x01, VextSupply1HwHPReq1Valid
+ * 0x02, VextSupply2HwHPReq1Valid
+ * 0x04, VextSupply3HwHPReq1Valid
+ */
+ REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x07),
+ /*
+ * 0x08, VanaHwHPReq2Valid
+ * 0x20, Vaux1HwHPReq2Valid
+ * 0x40, Vaux2HwHPReq2Valid
+ * 0x80, Vaux3HwHPReq2Valid
+ */
+ REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xe8),
+ /*
+ * 0x01, VextSupply1HwHPReq2Valid
+ * 0x02, VextSupply2HwHPReq2Valid
+ * 0x04, VextSupply3HwHPReq2Valid
+ */
+ REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x07),
+ /*
+ * 0x20, VanaSwHPReqValid
+ * 0x80, Vaux1SwHPReqValid
+ */
+ REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xa0),
+ /*
+ * 0x01, Vaux2SwHPReqValid
+ * 0x02, Vaux3SwHPReqValid
+ * 0x04, VextSupply1SwHPReqValid
+ * 0x08, VextSupply2SwHPReqValid
+ * 0x10, VextSupply3SwHPReqValid
+ */
+ REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x1f),
+ /*
+ * 0x02, SysClkReq2Valid1
+ * ...
+ * 0x80, SysClkReq8Valid1
+ */
+ REG_INIT(AB8500_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe),
+ /*
+ * 0x02, SysClkReq2Valid2
+ * ...
+ * 0x80, SysClkReq8Valid2
+ */
+ REG_INIT(AB8500_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe),
+ /*
+ * 0x02, VTVoutEna
+ * 0x04, Vintcore12Ena
+ * 0x38, Vintcore12Sel
+ * 0x40, Vintcore12LP
+ * 0x80, VTVoutLP
+ */
+ REG_INIT(AB8500_REGUMISC1, 0x03, 0x80, 0xfe),
+ /*
+ * 0x02, VaudioEna
+ * 0x04, VdmicEna
+ * 0x08, Vamic1Ena
+ * 0x10, Vamic2Ena
+ */
+ REG_INIT(AB8500_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
+ /*
+ * 0x01, Vamic1_dzout
+ * 0x02, Vamic2_dzout
+ */
+ REG_INIT(AB8500_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
+ /*
+ * 0x0c, VBBNRegu
+ * 0x03, VBBPRegu
+ * NOTE! PRCMU register
+ */
+ REG_INIT(AB8500_ARMREGU2, 0x04, 0x01, 0x0f),
+ /*
+ * 0x0c, VBBPSel1
+ * 0x03, VBBNSel1
+ * NOTE! PRCMU register
+ */
+ REG_INIT(AB8500_VBBSEL1, 0x04, 0x11, 0x0f),
+ /*
+ * 0x0c, VBBNSel2
+ * 0x03, VBBPSel2
+ * NOTE! PRCMU register
+ */
+ REG_INIT(AB8500_VBBSEL2, 0x04, 0x12, 0x0f),
+ /*
+ * 0x03, Vsmps1Regu
+ * 0x0c, Vsmps1SelCtrl
+ */
+ REG_INIT(AB8500_VSMPS1REGU, 0x04, 0x03, 0x0f),
+ /*
+ * 0x03, Vsmps2Regu
+ * 0x0c, Vsmps2SelCtrl
+ */
+ REG_INIT(AB8500_VSMPS2REGU, 0x04, 0x04, 0x0f),
+ /*
+ * 0x03, Vsmps3Regu
+ * 0x0c, Vsmps3SelCtrl
+ * NOTE! PRCMU register
+ */
+ REG_INIT(AB8500_VSMPS3REGU, 0x04, 0x05, 0x0f),
+ /*
+ * 0x0c, VanaRegu
+ * 0x03, VpllRegu
+ */
+ REG_INIT(AB8500_VPLLVANAREGU, 0x04, 0x06, 0x0f),
+ /*
+ * 0x01, VrefDDREna
+ * 0x02, VrefDDRSleepMode
+ */
+ REG_INIT(AB8500_VREFDDR, 0x04, 0x07, 0x03),
+ /*
+ * 0x03, VextSupply1Regu
+ * 0x0c, VextSupply2Regu
+ * 0x30, VextSupply3Regu
+ * 0x40, ExtSupply2Bypass
+ * 0x80, ExtSupply3Bypass
+ */
+ REG_INIT(AB8500_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
+ /*
+ * 0x03, Vaux1Regu
+ * 0x0c, Vaux2Regu
+ */
+ REG_INIT(AB8500_VAUX12REGU, 0x04, 0x09, 0x0f),
+ /*
+ * 0x0c, Vrf1Regu
+ * 0x03, Vaux3Regu
+ */
+ REG_INIT(AB8500_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
+ /*
+ * 0x3f, Vsmps1Sel1
+ */
+ REG_INIT(AB8500_VSMPS1SEL1, 0x04, 0x13, 0x3f),
+ /*
+ * 0x7f, Vsmps3Sel1
+ */
+ REG_INIT(AB8500_VSMPS3SEL1, 0x04, 0x1b, 0x7f),
+ /*
+ * 0x7f, Vsmps3Sel2
+ */
+ REG_INIT(AB8500_VSMPS3SEL2, 0x04, 0x1c, 0x7f),
+ /*
+ * 0x0f, Vaux1Sel
+ */
+ REG_INIT(AB8500_VAUX1SEL, 0x04, 0x1f, 0x0f),
+ /*
+ * 0x0f, Vaux2Sel
+ */
+ REG_INIT(AB8500_VAUX2SEL, 0x04, 0x20, 0x0f),
+ /*
+ * 0x07, Vaux3Sel
+ */
+ REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x07),
+ /*
+ * 0x01, VextSupply12LP
+ */
+ REG_INIT(AB8500_REGUCTRL2SPARE, 0x04, 0x22, 0x01),
+ /*
+ * 0x04, Vaux1Disch
+ * 0x08, Vaux2Disch
+ * 0x10, Vaux3Disch
+ * 0x20, Vintcore12Disch
+ * 0x40, VTVoutDisch
+ * 0x80, VaudioDisch
+ */
+ REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
+ /*
+ * 0x02, VanaDisch
+ * 0x04, VdmicPullDownEna
+ * 0x10, VdmicDisch
+ */
+ REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
+};
+
+static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
+ struct ab8500_platform_data *pdata;
+ int i, err;
+
+ if (!ab8500) {
+ dev_err(&pdev->dev, "null mfd parent\n");
+ return -EINVAL;
+ }
+ pdata = dev_get_platdata(ab8500->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "null pdata\n");
+ return -EINVAL;
+ }
+
+ /* make sure the platform data has the correct size */
+ if (pdata->num_regulator != ARRAY_SIZE(ab8500_regulator_info)) {
+ dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
+ return -EINVAL;
+ }
+
+ /* initialize registers */
+ for (i = 0; i < pdata->num_regulator_reg_init; i++) {
+ int id;
+ u8 value;
+
+ id = pdata->regulator_reg_init[i].id;
+ value = pdata->regulator_reg_init[i].value;
+
+ /* check for configuration errors */
+ if (id >= AB8500_NUM_REGULATOR_REGISTERS) {
+ dev_err(&pdev->dev,
+ "Configuration error: id outside range.\n");
+ return -EINVAL;
+ }
+ if (value & ~ab8500_reg_init[id].mask) {
+ dev_err(&pdev->dev,
+ "Configuration error: value outside mask.\n");
+ return -EINVAL;
+ }
+
+ /* initialize register */
+ err = abx500_mask_and_set_register_interruptible(&pdev->dev,
+ ab8500_reg_init[id].bank,
+ ab8500_reg_init[id].addr,
+ ab8500_reg_init[id].mask,
+ value);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "Failed to initialize 0x%02x, 0x%02x.\n",
+ ab8500_reg_init[id].bank,
+ ab8500_reg_init[id].addr);
+ return err;
+ }
+ dev_vdbg(&pdev->dev,
+ " init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+ ab8500_reg_init[id].bank,
+ ab8500_reg_init[id].addr,
+ ab8500_reg_init[id].mask,
+ value);
+ }
+
+ /*
+ * Remove below when ab8500v2.0 is no longer important.
+ * Below only affects power consumption and is depending on the
+ * HREF OTP configuration.
+ * It changes the default setting for VextSupply3Regu to Low Power.
+ * Active high or low is depending on OTP which is changed from ab8500v3.0.
+ */
+ if (abx500_get_chip_id(&pdev->dev) < 0x30) {
+ err = abx500_mask_and_set_register_interruptible(&pdev->dev,
+ AB8500_REGU_CTRL2, 0x08, 0x30, 0x30);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "Failed to override 0x%02x, 0x%02x.\n",
+ AB8500_REGU_CTRL2, 0x08);
+ return err;
+ }
+ }
+
+ /* register all regulators */
+ for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+ struct ab8500_regulator_info *info = NULL;
+
+ /* assign per-regulator data */
+ info = &ab8500_regulator_info[i];
+ info->dev = &pdev->dev;
+
+ /* fix for hardware before ab8500v2.0 */
+ if (abx500_get_chip_id(info->dev) < 0x20) {
+ if (info->desc.id == AB8500_LDO_AUX3) {
+ info->desc.n_voltages =
+ ARRAY_SIZE(ldo_vauxn_voltages);
+ info->voltages = ldo_vauxn_voltages;
+ info->voltages_len =
+ ARRAY_SIZE(ldo_vauxn_voltages);
+ info->voltage_mask = 0xf;
+ }
+ }
+
+ /* register regulator with framework */
+ info->regulator = regulator_register(&info->desc, &pdev->dev,
+ &pdata->regulator[i], info);
+ if (IS_ERR(info->regulator)) {
+ err = PTR_ERR(info->regulator);
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ info->desc.name);
+ /* when we fail, un-register all earlier regulators */
+ while (--i >= 0) {
+ info = &ab8500_regulator_info[i];
+ regulator_unregister(info->regulator);
+ }
+ return err;
+ }
+
+ dev_vdbg(rdev_get_dev(info->regulator),
+ "%s-probed\n", info->desc.name);
+ }
+
+ return 0;
+}
+
+static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+ struct ab8500_regulator_info *info = NULL;
+ info = &ab8500_regulator_info[i];
+
+ dev_vdbg(rdev_get_dev(info->regulator),
+ "%s-remove\n", info->desc.name);
+
+ regulator_unregister(info->regulator);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ab8500_regulator_driver = {
+ .probe = ab8500_regulator_probe,
+ .remove = __devexit_p(ab8500_regulator_remove),
+ .driver = {
+ .name = "ab8500-regulator",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ab8500_regulator_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&ab8500_regulator_driver);
+ if (ret != 0)
+ pr_err("Failed to register ab8500 regulator: %d\n", ret);
+
+ return ret;
+}
+subsys_initcall(ab8500_regulator_init);
+
+static void __exit ab8500_regulator_exit(void)
+{
+ platform_driver_unregister(&ab8500_regulator_driver);
+}
+module_exit(ab8500_regulator_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
+MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
+MODULE_ALIAS("platform:ab8500-regulator");
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-05 01:36:47 +0000