summaryrefslogtreecommitdiff
path: root/board/freescale/mpc8641hpcn
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/mpc8641hpcn')
-rw-r--r--board/freescale/mpc8641hpcn/config.mk2
-rw-r--r--board/freescale/mpc8641hpcn/ddr.c147
-rw-r--r--board/freescale/mpc8641hpcn/law.c38
-rw-r--r--board/freescale/mpc8641hpcn/mpc8641hpcn.c202
-rw-r--r--board/freescale/mpc8641hpcn/u-boot.lds1
5 files changed, 228 insertions, 162 deletions
diff --git a/board/freescale/mpc8641hpcn/config.mk b/board/freescale/mpc8641hpcn/config.mk
index f778dcbe0..487a76699 100644
--- a/board/freescale/mpc8641hpcn/config.mk
+++ b/board/freescale/mpc8641hpcn/config.mk
@@ -25,7 +25,7 @@
# default CCSRBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
#
-TEXT_BASE = 0xfff00000
+TEXT_BASE = 0xeff00000
PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float
diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c
index 5163abf05..3789b5442 100644
--- a/board/freescale/mpc8641hpcn/ddr.c
+++ b/board/freescale/mpc8641hpcn/ddr.c
@@ -10,6 +10,7 @@
#include <i2c.h>
#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
static void
get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -45,44 +46,120 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
}
}
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+typedef struct {
+ u32 datarate_mhz_low;
+ u32 datarate_mhz_high;
+ u32 n_ranks;
+ u32 clk_adjust;
+ u32 cpo;
+ u32 write_data_delay;
+} board_specific_parameters_t;
+
+/* XXX: these values need to be checked for all interleaving modes. */
+const board_specific_parameters_t board_specific_parameters[2][16] = {
+ {
+ /* memory controller 0 */
+ /* lo| hi| num| clk| cpo|wrdata */
+ /* mhz| mhz|ranks|adjst| | delay */
+ { 0, 333, 4, 7, 7, 3},
+ {334, 400, 4, 7, 9, 3},
+ {401, 549, 4, 7, 9, 3},
+ {550, 650, 4, 7, 10, 4},
+
+ { 0, 333, 3, 7, 7, 3},
+ {334, 400, 3, 7, 9, 3},
+ {401, 549, 3, 7, 9, 3},
+ {550, 650, 3, 7, 10, 4},
+
+ { 0, 333, 2, 7, 7, 3},
+ {334, 400, 2, 7, 9, 3},
+ {401, 549, 2, 7, 9, 3},
+ {550, 650, 2, 7, 10, 4},
+
+ { 0, 333, 1, 7, 7, 3},
+ {334, 400, 1, 7, 9, 3},
+ {401, 549, 1, 7, 9, 3},
+ {550, 650, 1, 7, 10, 4}
+ },
+
+ {
+ /* memory controller 1 */
+ /* lo| hi| num| clk| cpo|wrdata */
+ /* mhz| mhz|ranks|adjst| | delay */
+ { 0, 333, 4, 7, 7, 3},
+ {334, 400, 4, 7, 9, 3},
+ {401, 549, 4, 7, 9, 3},
+ {550, 650, 4, 7, 10, 4},
+
+ { 0, 333, 3, 7, 7, 3},
+ {334, 400, 3, 7, 9, 3},
+ {401, 549, 3, 7, 9, 3},
+ {550, 650, 3, 7, 10, 4},
+
+ { 0, 333, 2, 7, 7, 3},
+ {334, 400, 2, 7, 9, 3},
+ {401, 549, 2, 7, 9, 3},
+ {550, 650, 2, 7, 10, 4},
+
+ { 0, 333, 1, 7, 7, 3},
+ {334, 400, 1, 7, 9, 3},
+ {401, 549, 1, 7, 9, 3},
+ {550, 650, 1, 7, 10, 4}
+ }
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
{
- /*
- * Factors to consider for clock adjust:
- * - number of chips on bus
- * - position of slot
- * - DDR1 vs. DDR2?
- * - ???
- *
- * This needs to be determined on a board-by-board basis.
- * 0110 3/4 cycle late
- * 0111 7/8 cycle late
- */
- popts->clk_adjust = 7;
+ const board_specific_parameters_t *pbsp =
+ &(board_specific_parameters[ctrl_num][0]);
+ u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+ sizeof(board_specific_parameters[0][0]);
+ u32 i;
+ u32 j;
+ ulong ddr_freq;
- /*
- * Factors to consider for CPO:
- * - frequency
- * - ddr1 vs. ddr2
+ /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+ * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+ * there are two dimms in the controller, set odt_rd_cfg to 3 and
+ * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
*/
- popts->cpo_override = 10;
-
- /*
- * Factors to consider for write data delay:
- * - number of DIMMs
- *
- * 1 = 1/4 clock delay
- * 2 = 1/2 clock delay
- * 3 = 3/4 clock delay
- * 4 = 1 clock delay
- * 5 = 5/4 clock delay
- * 6 = 3/2 clock delay
- */
- popts->write_data_delay = 3;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (i&1) { /* odd CS */
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 0;
+ } else { /* even CS */
+ if ((CONFIG_DIMM_SLOTS_PER_CTLR == 2) &&
+ (pdimm[i/2].n_ranks != 0)) {
+ popts->cs_local_opts[i].odt_rd_cfg = 3;
+ popts->cs_local_opts[i].odt_wr_cfg = 3;
+ } else {
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 4;
+ }
+ }
+ }
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
+ /* Get clk_adjust, cpo, write_data_delay, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
*/
- popts->half_strength_driver_enable = 0;
+ ddr_freq = fsl_ddr_get_mem_data_rate() / 1000000;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ if (pdimm[j].n_ranks > 0) {
+ for (i = 0; i < num_params; i++) {
+ if (ddr_freq >= pbsp->datarate_mhz_low &&
+ ddr_freq <= pbsp->datarate_mhz_high &&
+ pdimm[j].n_ranks == pbsp->n_ranks) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->cpo_override = pbsp->cpo;
+ popts->write_data_delay =
+ pbsp->write_data_delay;
+ break;
+ }
+ pbsp++;
+ }
+ }
+ }
+
}
diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index 2d6c3c175..bd357b866 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -31,34 +31,38 @@
* LAW(Local Access Window) configuration:
*
* 0x0000_0000 0x7fff_ffff DDR 2G
+ * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
- * 0xf800_0000 0xf80f_ffff CCSRBAR 1M
- * 0xf810_0000 0xf81f_ffff PIXIS 1M
- * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
+ * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
+ * 0x8000_0000 0x9fff_ffff RapidIO 512M
+ * endif
+ * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT)
+ * 0xffc0_0000 0xffc0_ffff PCI1 IO 64K
+ * 0xffc1_0000 0xffc1_ffff PCI2 IO 64K
+ * 0xffe0_0000 0xffef_ffff CCSRBAR 1M
+ * 0xffdf_0000 0xffe0_0000 PIXIS, CF 64K
+ * 0xef80_0000 0xefff_ffff FLASH (boot bank) 8M
*
* Notes:
- * CCSRBAR don't need a configured Local Access Window.
+ * CCSRBAR doesn't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*/
struct law_entry law_table[] = {
#if !defined(CONFIG_SPD_EEPROM)
- SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
+ SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
#endif
- SET_LAW(CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
- SET_LAW(CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
- SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
- SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
- SET_LAW((CFG_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-#if !defined(CONFIG_SPD_EEPROM)
- SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
+#ifdef CONFIG_PCI
+ SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
+#elif defined(CONFIG_RIO)
+ SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
#endif
- SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+ SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 1bb563e41..b83ed6c45 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -29,14 +29,11 @@
#include <asm/io.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <netdev.h>
#include "../common/pixis.h"
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-long int fixed_sdram(void);
+phys_size_t fixed_sdram(void);
int board_early_init_f(void)
{
@@ -56,7 +53,7 @@ int checkboard(void)
phys_size_t
initdram(int board_type)
{
- long dram_size = 0;
+ phys_size_t dram_size = 0;
#if defined(CONFIG_SPD_EEPROM)
dram_size = fsl_ddr_sdram();
@@ -64,18 +61,11 @@ initdram(int board_type)
dram_size = fixed_sdram();
#endif
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
puts(" DDR: ");
return dram_size;
#endif
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
-
puts(" DDR: ");
return dram_size;
}
@@ -85,26 +75,26 @@ initdram(int board_type)
/*
* Fixed sdram init -- doesn't use serial presence detect.
*/
-long int
+phys_size_t
fixed_sdram(void)
{
-#if !defined(CFG_RAMBOOT)
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+#if !defined(CONFIG_SYS_RAMBOOT)
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
- ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
- ddr->cs0_config = CFG_DDR_CS0_CONFIG;
- ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
- ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
- ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
- ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
- ddr->sdram_mode_1 = CFG_DDR_MODE_1;
- ddr->sdram_mode_2 = CFG_DDR_MODE_2;
- ddr->sdram_interval = CFG_DDR_INTERVAL;
- ddr->sdram_data_init = CFG_DDR_DATA_INIT;
- ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
- ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
- ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;
+ ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+ ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+ ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+ ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+ ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ ddr->sdram_mode_1 = CONFIG_SYS_DDR_MODE_1;
+ ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+ ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+ ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+ ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+ ddr->sdram_ocd_cntl = CONFIG_SYS_DDR_OCD_CTRL;
+ ddr->sdram_ocd_status = CONFIG_SYS_DDR_OCD_STATUS;
#if defined (CONFIG_DDR_ECC)
ddr->err_disable = 0x0000008D;
@@ -116,42 +106,22 @@ fixed_sdram(void)
#if defined (CONFIG_DDR_ECC)
/* Enable ECC checking */
- ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000);
+ ddr->sdram_cfg_1 = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
#else
- ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
- ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+ ddr->sdram_cfg_1 = CONFIG_SYS_DDR_CONTROL;
+ ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
#endif
asm("sync; isync");
udelay(500);
#endif
- return CFG_SDRAM_SIZE * 1024 * 1024;
+ return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
}
#endif /* !defined(CONFIG_SPD_EEPROM) */
#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_fsl86xxads_config_table[] = {
- {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
- {}
-};
-#endif
-
-
-static struct pci_controller pci1_hose = {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc86xxcts_config_table
-#endif
-};
+static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI */
#ifdef CONFIG_PCI2
@@ -160,20 +130,22 @@ static struct pci_controller pci2_hose;
int first_free_busno = 0;
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
void pci_init_board(void)
{
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+#ifdef CONFIG_PCI1
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
+ struct pci_controller *hose = &pci1_hose;
+ struct pci_region *r = hose->regions;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint devdisr = gur->devdisr;
uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
-#ifdef CONFIG_PCI1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
- struct pci_controller *hose = &pci1_hose;
#ifdef DEBUG
uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
>> MPC8641_PORBMSR_HA_SHIFT;
@@ -192,27 +164,23 @@ void pci_init_board(void)
debug("\n");
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCI1_MEM_BASE,
- CFG_PCI1_MEM_PHYS,
- CFG_PCI1_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI1_MEM_BASE,
+ CONFIG_SYS_PCI1_MEM_PHYS,
+ CONFIG_SYS_PCI1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCI1_IO_BASE,
- CFG_PCI1_IO_PHYS,
- CFG_PCI1_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI1_IO_BASE,
+ CONFIG_SYS_PCI1_IO_PHYS,
+ CONFIG_SYS_PCI1_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -227,8 +195,8 @@ void pci_init_board(void)
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
*/
- in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE
- + CFG_PCI1_MEM_SIZE - 0x1000000)));
+ in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_BASE
+ + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
} else {
puts("PCI-EXPRESS 1: Disabled\n");
@@ -240,33 +208,28 @@ void pci_init_board(void)
#ifdef CONFIG_PCI2
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
struct pci_controller *hose = &pci2_hose;
-
+ struct pci_region *r = hose->regions;
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCI2_MEM_BASE,
- CFG_PCI2_MEM_PHYS,
- CFG_PCI2_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI2_MEM_BASE,
+ CONFIG_SYS_PCI2_MEM_PHYS,
+ CONFIG_SYS_PCI2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCI2_IO_BASE,
- CFG_PCI2_IO_PHYS,
- CFG_PCI2_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI2_IO_BASE,
+ CONFIG_SYS_PCI2_IO_PHYS,
+ CONFIG_SYS_PCI2_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -285,32 +248,46 @@ void pci_init_board(void)
#if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+ struct pci_controller *hose);
void
ft_board_setup(void *blob, bd_t *bd)
{
- int node, tmp[2];
- const char *path;
+ int off;
+ u64 *tmp;
+ u32 *addrcells;
ft_cpu_setup(blob, bd);
- node = fdt_path_offset(blob, "/aliases");
- tmp[0] = 0;
- if (node >= 0) {
#ifdef CONFIG_PCI1
- path = fdt_getprop(blob, node, "pci0", NULL);
- if (path) {
- tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
#endif
#ifdef CONFIG_PCI2
- path = fdt_getprop(blob, node, "pci1", NULL);
- if (path) {
- tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
#endif
+
+ /*
+ * Warn if it looks like the device tree doesn't match u-boot.
+ * This is just an estimation, based on the location of CCSR,
+ * which is defined by the "reg" property in the soc node.
+ */
+ off = fdt_path_offset(blob, "/soc8641");
+ addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL);
+ tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
+
+ if (tmp) {
+ u64 addr;
+ if (addrcells && (*addrcells == 1))
+ addr = *(u32 *)tmp;
+ else
+ addr = *tmp;
+
+ if (addr != CONFIG_SYS_CCSRBAR_PHYS)
+ printf("WARNING: The CCSRBAR address in your .dts "
+ "does not match the address of the CCSR "
+ "in u-boot. This means your .dts might "
+ "be old.\n");
}
}
#endif
@@ -379,3 +356,10 @@ get_board_sys_clk(ulong dummy)
return val;
}
+
+int board_eth_init(bd_t *bis)
+{
+ /* Initialize TSECs */
+ cpu_eth_init(bis);
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/mpc8641hpcn/u-boot.lds b/board/freescale/mpc8641hpcn/u-boot.lds
index 4f884f987..6c9da1f32 100644
--- a/board/freescale/mpc8641hpcn/u-boot.lds
+++ b/board/freescale/mpc8641hpcn/u-boot.lds
@@ -129,6 +129,7 @@ SECTIONS
*(.dynbss)
*(.bss)
*(COMMON)
+ . = ALIGN(4);
}
_end = . ;
PROVIDE (end = .);
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-19 05:34:37 +0000